The company solemnly promises: free on-site installation and commissioning of the entire machine, free training of technical staff, one year warranty and lifetime maintenance!
  • ●使用聚氨酯喷涂机白料时要细致什么 [05-10] ● What to be careful when using polyurethane sprayer white material
  • ●聚氨酯保温材料行业未来发展前景可 [05-12] ● The future development prospects of polyurethane thermal insulation material industry are promising
  • ●如何在屋顶操作聚氨酯喷涂 [09-10] ● How to operate polyurethane spray on the roof
  • ●怎么解决聚氨酯发泡机空泡现象 [05-08] ● How to solve the cavitation phenomenon of polyurethane foaming machine
  • ●保温材料阻燃性能不合格成冷库安全 [05-05] Insufficient flame retardant performance of insulation materials to become safe in cold storage
  • ●购买防水涂料需要重点关注的性能指 [05-10] ● The performance indicators that need to focus on when buying waterproof coatings
  • ●异氰酸酯与聚脲弹性体性能的关系 [08-17] The relationship between isocyanate and polyurea elastomer performance
  • ●现代建筑工地为什么要用【聚氨酯发 [03-21] ● Why use modern polyurethane construction site
  • ●喷涂硬泡聚氨酯外墙防水保温施工流 [05-16] ● Waterproof thermal insulation construction flow for spraying rigid foam polyurethane exterior
  • ●温度控制是解决聚氨酯发泡机的空泡 [05-08] ● Temperature control is to solve the cavitation of polyurethane foaming machine
  • ●「聚氨酯产品」地铁防水工程复合防 [07-24] ● "Polyurethane Products"
  • ●哪些因素会影响聚氨酯发泡质量 [05-07] ● What factors will affect the quality of polyurethane foam
  • ●详解聚氨酯发泡机操作规程 [05-07] ● Detailed operation rules of polyurethane foaming machine
  • ●必看! [05-10] ● Must see! The relationship between waterproof coating thickness and waterproof life
  • ●聚氨酯发泡机混合器中物料的流场分 [05-18] ● Flow field analysis of materials in mixer of polyurethane foaming machine
  • ●聚氨酯喷涂作业时“应该”和“不应 [10-29] ● "should" and "should not" when spraying polyurethane
  • ●影响聚氨酯喷涂施工出方率的几个因 [10-29] ● Several factors affecting the yield of polyurethane spraying construction
  • ●聚氨酯喷涂施工的常见问题及原因 [10-29] ● Common problems and reasons of polyurethane spraying construction
  • ●聚氨酯防腐应用以及储存 [10-21] ● Application and storage of polyurethane anticorrosion
  • ●聚氨酯防腐漆在出现剥落现象 [10-21] ● The polyurethane anticorrosive paint is peeling off
  • ●聚氨酯防腐的主要涂覆方法 [10-21] ● Main coating methods for polyurethane anticorrosion
  • ●聚氨酯防腐的涂装工艺 [10-21] ● Polyurethane anticorrosive coating process
  • ●如何提高聚氨酯防腐的性能 [10-21] ● How to improve the anticorrosive performance of polyurethane
  • ●聚氨酯防腐适用领域以及特点 [10-21] ● Application areas and characteristics of polyurethane anticorrosion
  • ●聚氨酯高压喷涂设备的主要优点 [10-19] ● Main advantages of high pressure polyurethane spray equipment
  • ●聚氨酯发泡机选购前的对比方法 [09-19] ● Comparison method before purchasing polyurethane foaming machine
  • ●聚氨酯发泡机特点和工作流程介绍 [09-19] ● Introduction of polyurethane foam machine characteristics and work flow
  • ●聚氨酯高压发泡机和低压发泡机的区 [08-08] ● The area of polyurethane high pressure foaming machine and low pressure foaming machine
  • ●「耐高温材料」聚氨酯硬泡的发展方 [07-25] ● Development method of "high temperature resistant material" polyurethane rigid foam
  • ●「ws15」喷涂型聚氨酯应用指南 [07-25] ● "ws15" Spraying Polyurethane Application Guide
  • "May Day" Decoration Knowledge Literacy: Kitchen Waterproofing Guide
    来源:http://motokone.com发布时间: 2018-04-28 13:26 Author: Polyurethane foam machine Source: http: // Published: 2018-04-28 13:26
    First of all, I wish you a happy "May 1st" Labor Day!
    Glory of labor. When we are walking on clean roads, elegant neighborhoods, and beautiful scenery, please do n’t forget to extend a smile to the workers, respect their work, make them, and make our lives more beautiful.
    Our beloved waterproof people also fight front-line all year round, research and development, consumption, sales, construction, maintenance, pay tribute to them, and pay tribute to every hardworking worker!
    Decoration Literacy Literacy: Kitchen Waterproofing Guide
    Why should the kitchen bathroom be waterproof?
    1. The kitchen is an area with a lot of water in the room. If there is often water in the air, water is likely to flow into the wall through the gap in the wall and cause leakage. Once the floor drain is blocked, the water in the air will easily pass through. The cement layer leaked downwards.
    2. Once the kitchen leaks, it will take a lot of financial, manpower, and time to rework or repair. If you want to knock down the floor tiles to find the water pipe in the cement layer, check the source of the leak, stop repairing, and then re-install Floor tiles, etc., bring a lot of inconvenience to the owner's life.
    3. If the kitchen and bathroom leak, it will affect the lives of the neighbors downstairs, bring about influence and inconvenience to the lives of the neighbors, and even seriously endanger the relationships between the neighbors. It was embarrassing to see my neighbor who looked down.
    4. If the leakage is serious and damage is caused to the decoration downstairs, compensation must be stopped to create unnecessary economic losses. It can be seen that the impact and inconvenience of the kitchen and bathroom leakage on life is very great. In order to prevent the above-mentioned phenomenon from happening, the water-proof treatment should be done when decorating the kitchen and bathroom, to prevent the trouble.
    Kitchen and bathroom waterproof precautions:
    1. The kitchen on the first floor must be carefully checked for leaks before the kitchen is renovated. If there are any leaks, the waterproofing works on the upper floor should be done before the renovation.
    2. When the kitchen is renovated, if the original wall and floor tiles are removed and renovated, regardless of whether the original waterproof layer has been made, the waterproof layer should be redone before the wall and floor tiles are reattached. The surrounding side wall waterproof layer is 200mm high and there is a bathtub. The waterproof layer should do everything that the shower can spray.
    3. Waterproof treatment when the kitchen is not renovated: if the original waterproof layer is not made, then add the waterproof layer according to the above method; if the original waterproof layer has been made, you should carefully check to see if the waterproof layer is in place and damaged, otherwise repair it . After the repair, the water injection experiment shall be conducted under the conditions of no leakage and no wetting downstairs and surrounding walls.
    Bathroom waterproof construction:
    1. Don't destroy the original waterproof layer during hydropower transformation
    Generally speaking, the new house received by the decoration owner only needs to pass the quality inspection, that is, the waterproof layer has been made. However, many decoration owners will change the layout of the bathroom and the water pipeline when they stop the hydropower transformation. Therefore, the owner must monitor the construction. Emphasize to the decoration workers not to destroy the original waterproof layer. If the original waterproof layer is forced to be destroyed, it must be repaired in time, and the waterproofing project must be redone to ensure that no leakage will occur.
    2. Buy the right waterproof information
    The waterproof material recommended by the Ministry of National Construction is a two-component environmentally-friendly LM composite waterproof coating, mainly because this coating can tightly enclose the pipeline and the air, penetrate into the gap, and will not shrink after boring, which is more than rigid materials such as waterproof cement. It is suitable for small area houses with many pipes and gaps in the bathroom.
    Website Keywords: Polyurea Spraying Machine-Polyurea Waterproof Coating-Polyurea Equipment-Polyurea Spraying Equipment
    You might be interested in the following information?