"Eva material" waterproof layer thickness, height is not up to standard
发布时间： 2019-07-25 13:39 Author: Polyurethane foam machine Source: http: //motokone.com
Published: 2019-07-25 13:39
Chen bought a house in Yantai. Due to the busy work, all the decoration was subcontracted to the decoration company. The decoration effect was good, but after two or three months, the bathroom began to leak, and the downstairs and downstairs were also affected. Xiao Chen is unfortunate.
After the repair of the Nine Asahi professional waterproofing engineering company, the maintenance staff demolished the more serious leakage area, and found that the thickness of the waterproof layer is lacking, as long as it is thin, and the height of the waterproof layer on the outer wall is only required, such items will definitely leak.
Nine Asahi Waterproof and Anticorrosion Tips Owners: Waterproof paint for home decoration, sufficient thickness for better waterproof effect. "
Ordinary bathrooms are waterproofed, and the walls are also made with waterproof coatings about centimeters high to prevent water from passing through the walls. However, if the bathroom wall is a light-weight wall without load, the entire wall must be painted with waterproof coating. If your home uses two fans to shower the screen, the two related walls should also be painted. If you use a bathtub, the height of the waterproof paint on the wall next to the bathtub is higher than the upper edge of the bathtub.
The joints between the walls and floors of the bathroom and the joints between the pipes and the air are easily problematic. During construction, workers must be urged to dispose of these corners. All waterproof coatings must be painted with "eva material"
You might be interested in the following information?