Polyurethane Foaming Machine Features and Workflow Introduction
发布时间： 2019-09-19 16:32 Author: Polyurethane foam machine Source: http: //motokone.com
Published: 2019-09-19 16:32
Polyurethane pouring and filling equipment only needs the polyurethane component material, and the performance index meets the formulation requirements. This equipment can produce uniform and qualified foam products. It is composed of polyether polyol and isocyanate in various chemical additives, such as foaming agent, catalyst, emulsifier and so on. Polyurethane foaming machine
can be used in automobile interior decoration, thermal insulation wall spray insulation pipe manufacturing, bicycle and motorcycle seat cushion sponge processing.
Polyurethane foaming machine features:
1. Excellent surface quality: the latex paint forms a smooth, smooth and full surface on the wall, without brush marks, roll marks, and dense coatings. This is unmatched by traditional manual roll, brush or air spray.
2. Satisfactory construction efficiency: Beyond user satisfaction, win user trust, and establish a professional construction image and reputation.
3. High-pressure spraying and strong penetration force make the coating penetrate into the gap of the wall, increase the mechanical occlusion between the coating and the wall, improve the adhesion of the coating, and extend the life of the coating. Higher viscosity coatings do not need to add excessive water, so they can maintain the physical properties of the coatings and effectively extend the coating life.
4. Save paint: Compared with other coating methods, the paint film of the same thickness can save more than 30% of the paint, and the film thickness can be formed in one time, without multiple spraying. There are very few flying mists, which really achieves environmental protection decoration.
So what are the workflows of polyurethane foam machines?
Polyurethane foaming machines have been widely used in roof and wall insulation in foreign countries. The main application forms are composite panels and field spraying. High-pressure jet, strong penetrating force, and wall thickness of the coating, increase the mechanical occlusion between the coating and the wall, improve the adhesion of the coating, extend the life of the coating, increase the adhesion of the coating, and make it more dense High-viscosity coating without excessive water, so it can maintain complete coating physical properties and extend coating life.
Water-resistant rigid polyurethane foam and its continuous non-adhesive characteristics and glue-free process ensure better wind pressure resistance of the cavity walls, and the walls that prevent the alkali resistance route are caused by capillaries. Cracks caused by the water disaster covered by the existing thin-plate pasting system and polystyrene granular slurry system must be strictly prevented. The rigid polyurethane foam system can use cement mortar and other traditional covering materials. Potential cause of water.
You might be interested in the following information?