bwin中文地址

The company solemnly promises: free on-site installation and commissioning of the entire machine, free training of technical staff, one year warranty and lifetime maintenance!
  • ●怎么解决聚氨酯发泡机空泡现象 [05-08] ● How to solve the cavitation phenomenon of polyurethane foaming machine
  • ●异氰酸酯与聚脲弹性体性能的关系 [08-17] The relationship between isocyanate and polyurea elastomer performance
  • ●聚氨酯保温材料行业未来发展前景可 [05-12] ● The future development prospects of polyurethane thermal insulation material industry are promising
  • ●如何在屋顶操作聚氨酯喷涂 [09-10] ● How to operate polyurethane spray on the roof
  • ●「聚氨酯产品」地铁防水工程复合防 [07-24] ● "Polyurethane Products"
  • ●详解聚氨酯发泡机操作规程 [05-07] ● Detailed operation rules of polyurethane foaming machine
  • ●喷涂硬泡聚氨酯外墙防水保温施工流 [05-16] ● Waterproof thermal insulation construction flow for spraying rigid foam polyurethane exterior
  • ●保温材料阻燃性能不合格成冷库安全 [05-05] Insufficient flame retardant performance of insulation materials to become safe in cold storage
  • ●现代建筑工地为什么要用【聚氨酯发 [03-21] ● Why use modern polyurethane construction site
  • ●使用聚氨酯喷涂机白料时要细致什么 [05-10] ● What to be careful when using polyurethane sprayer white material
  • ●必看! [05-10] ● Must see! The relationship between waterproof coating thickness and waterproof life
  • ●购买防水涂料需要重点关注的性能指 [05-10] ● The performance indicators that need to focus on when buying waterproof coatings
  • ●哪些因素会影响聚氨酯发泡质量 [05-07] ● What factors will affect the quality of polyurethane foam
  • ●温度控制是解决聚氨酯发泡机的空泡 [05-08] ● Temperature control is to solve the cavitation of polyurethane foaming machine
  • ●聚氨酯发泡机混合器中物料的流场分 [05-18] ● Flow field analysis of materials in mixer of polyurethane foaming machine
  • ●聚氨酯喷涂作业时“应该”和“不应 [10-29] ● "should" and "should not" when spraying polyurethane
  • ●影响聚氨酯喷涂施工出方率的几个因 [10-29] ● Several factors affecting the yield of polyurethane spraying construction
  • ●聚氨酯喷涂施工的常见问题及原因 [10-29] ● Common problems and reasons of polyurethane spraying construction
  • ●聚氨酯防腐应用以及储存 [10-21] ● Application and storage of polyurethane anticorrosion
  • ●聚氨酯防腐漆在出现剥落现象 [10-21] ● The polyurethane anticorrosive paint is peeling off
  • ●聚氨酯防腐的主要涂覆方法 [10-21] ● Main coating methods for polyurethane anticorrosion
  • ●聚氨酯防腐的涂装工艺 [10-21] ● Polyurethane anticorrosive coating process
  • ●如何提高聚氨酯防腐的性能 [10-21] ● How to improve the anticorrosive performance of polyurethane
  • ●聚氨酯防腐适用领域以及特点 [10-21] ● Application areas and characteristics of polyurethane anticorrosion
  • ●聚氨酯高压喷涂设备的主要优点 [10-19] ● Main advantages of high pressure polyurethane spray equipment
  • ●聚氨酯发泡机选购前的对比方法 [09-19] ● Comparison method before purchasing polyurethane foaming machine
  • ●聚氨酯发泡机特点和工作流程介绍 [09-19] ● Introduction of polyurethane foam machine characteristics and work flow
  • ●聚氨酯高压发泡机和低压发泡机的区 [08-08] ● The area of polyurethane high pressure foaming machine and low pressure foaming machine
  • ●「耐高温材料」聚氨酯硬泡的发展方 [07-25] ● Development method of "high temperature resistant material" polyurethane rigid foam
  • ●「ws15」喷涂型聚氨酯应用指南 [07-25] ● "ws15" Spraying Polyurethane Application Guide
  • 7 key points for paint construction, let you step by step --- the wall is clean and beautiful without cracking!
    来源:http://motokone.com发布时间: 2019-07-06 11:29 Author: Polyurethane foam machine Source: http: //motokone.com Published: 2019-07-06 11:29
    1. Can exterior wall paint be used for interior walls?
    The performance requirements of exterior wall coatings are higher than those of interior walls. Exterior wall coatings can be used for interior walls. Because the price of exterior wall paint is higher than interior wall paint, it is not generally used by consumers. However, sometimes when the interior wall coatings are more demanding or have special requirements, external wall coatings, such as bathrooms, toilets, and kitchens, can be used to make them more magnificent.
    2. Generally, interior wall coatings are not used for exterior walls?
    Water-based interior wall coatings are made of water, emulsion, pigments, fillers, metal powder, mica powder, additives and so on. Interior wall coatings are different from exterior wall coatings because they have different environmental resistance. Generally speaking, outdoor coatings need to have a certain resistance to wind, frost, rain, snow and sunshine (water resistance, alkali resistance, UV resistance, frost resistance, fade resistance, pollution resistance, etc.), so the raw materials selected in the formula Requires higher than interior wall paint. The environment experienced by general interior wall coatings is milder than that of exterior walls, so general interior wall coatings cannot be used for exterior walls.
    3. Why is there any requirement on the humidity and curing period of the wall before painting?
    The wall is wet. On the one hand, the moisture in the cement or mortar that has just been finished has not completely faded out; on the other hand, the environment is too wet or the rain has caused excessive humidity. An excessively wet wall surface will affect the adhesion of the paint surface, which will cause the paint surface to blister, crack, fade, and promote the growth of mold. And in the process of moisture evaporation and drying, the salt and alkali in the wall will ooze out and accumulate on the surface, which will damage the paint surface and make the color fade. Therefore, the humidity of the wall before construction is limited to 6% or less.
    After the cement wall is formed and plastered, it should have a curing period of at least 28 days, so that the cement is completely solidified, the size is stable, and the alkali is oozed out and washed away before painting.

    4. Why do we need surface treatment? What are the methods of surface treatment?
    No matter how good the coating used, if the surface is not adequately and properly treated beforehand, the resulting coating surface will not be perfect in terms of performance and benefits. The surface treatment varies from substrate to substrate, but the purpose is the same: to give a dry and stable substrate.
    Surface treatment methods: high-pressure water washing, sanding, temperature control, maintenance period of the substrate, shedding, pickling, solvent degreasing, sawing, sandblasting, repairing, etc.
    5. Can high-viscosity water-based interior wall paint be sprayed directly?
    Water-based interior wall paint with very high viscosity can be directly sprayed with airlessly without dilution or small dilution, and the effect is better. If you use air spray, the water-based interior wall coating must be diluted to the corresponding viscosity, because different spray guns, different air pressure, the required viscosity of the water-based interior wall coating is different. Water-based interior wall coatings require a large amount of spray paint and mist spray, and the spray spray must be large.
    6. How to choose the painting tool? What should I pay attention to when using a new pencil and a new stiff brush?
    According to the size, nature and paint material of the painted surface, different hard brushes and pens are used. Use a flat, hard-bristled brush for painting the primer and blending paint; use a flat-shaped brush with thinner bristles and better elasticity for applying the varnish; paint.
    When using a new hard-bristle brush, place the hard-bristle brush on No. 1 sandpaper before sanding the paint, sand the head of the bristle back and forth, smooth the hair, and then dip a little paint on the old surface. Brush back and forth several times to make the floating hairs fall off, so as to ensure that the bristles do not fall off easily when brushing.
    When using a new pen, in order to reduce the loss of hair, you should use your fingers to move back and forth before use to let the unsticky wool fall out, then soak it with hot water, flatten the pen tip, and wrap it with paper. Let it do it.
    7. Why is it better to paint more than two times when applying water-based interior wall paint?
    Water-based interior wall coatings are applied twice to achieve their proper hiding power and surface properties. Because the hiding power of the coating and the surface properties of the coating have a certain relationship with the thickness of the coating surface, in order to achieve added decorative and protective effects, water-based interior wall coatings are painted twice. The premise is that the construction is carried out in accordance with the substrate treatment and dilution rate required by the instructions.
    You might be interested in the following information?