[Polyurethane foaming machine] What are the advantages of foaming
发布时间： 2019-03-21 15:06 Author: Polyurethane foam machine Source: http: //motokone.com
Published: 2019-03-21 15:06
[ Polyurethane foaming machine
] The thermal conductivity of consumer products is generally around 0.025, which is better than polystyrene board. It is a better material in current building insulation data. Therefore, the polyurethane foaming machine is widely used in multi-form continuous consumption of rigid and semi-rigid polyurethane products. This installation has certain advantages before it can be used so widely.
The advantages of polyurethane foam are introduced as follows:
The pouring range can be adjusted from 0 to large. The conditioning accuracy is 1%. The polyurethane foaming machine has a temperature control system. When it reaches the specified temperature, it will automatically stop heating. 1%.
Polyurethane foaming machines also have solvent cleaning and water and air purging systems. Polyurethane foaming machines use cut-off doors to adjust the proportion of A and B materials with an accuracy of 1%.
The polyurethane foaming machine has an automatic feeding installation, which can stop feeding at any time, and the feeding is installed with two buckets, both of which can hold 120 kg of liquid. In addition, the bucket is also provided with a water jacket. The water temperature is used to heat or cool the material liquid. Each bucket has a water sight tube and a material sight tube.
[Polyurethane foaming machine] With time control system, the control time can be stopped and set between 0-99.9 seconds, and the accuracy can reach 1%.
What are the advantages of polyurethane foaming machine foaming
Characteristics of high pressure small polyurethane foaming machine
1. With two automatic feeding pumps, only need to put the automatic feeding pumps into the black and white barrels to feed the equipment automatically, saving labor.
2. The pipeline adopts the first copper strip heating and insulation design.
3. The high-pressure spray gun has been professionally designed, and the mixing chamber is small, and the residual material liquid and less automatic cleaning after mixing will not cause gun blocking.
4. The high-pressure small polyurethane foaming machine works at a pressure of 6-10Mpa.
5. The proportion of the extracted raw materials is accurate to ensure the accuracy of the mixing ratio.
You might be interested in the following information?