bwin中文地址

The company solemnly promises: free on-site installation and commissioning of the entire machine, free training of technical staff, one year warranty and lifetime maintenance!
  • ●异氰酸酯与聚脲弹性体性能的关系 [08-17] The relationship between isocyanate and polyurea elastomer performance
  • ●聚氨酯保温材料行业未来发展前景可 [05-12] ● The future development prospects of polyurethane thermal insulation material industry are promising
  • ●聚氨酯发泡机混合器中物料的流场分 [05-18] ● Flow field analysis of materials in mixer of polyurethane foaming machine
  • ●使用聚氨酯喷涂机白料时要细致什么 [05-10] ● What to be careful when using polyurethane sprayer white material
  • ●购买防水涂料需要重点关注的性能指 [05-10] ● The performance indicators that need to focus on when buying waterproof coatings
  • ●温度控制是解决聚氨酯发泡机的空泡 [05-08] ● Temperature control is to solve the cavitation of polyurethane foaming machine
  • ●喷涂硬泡聚氨酯外墙防水保温施工流 [05-16] ● Waterproof thermal insulation construction flow for spraying rigid foam polyurethane exterior
  • ●哪些因素会影响聚氨酯发泡质量 [05-07] ● What factors will affect the quality of polyurethane foam
  • ●保温材料阻燃性能不合格成冷库安全 [05-05] Insufficient flame retardant performance of insulation materials to become safe in cold storage
  • ●详解聚氨酯发泡机操作规程 [05-07] ● Detailed operation rules of polyurethane foaming machine
  • ●现代建筑工地为什么要用【聚氨酯发 [03-21] ● Why use modern polyurethane construction site
  • ●必看! [05-10] ● Must see! The relationship between waterproof coating thickness and waterproof life
  • ●「聚氨酯产品」地铁防水工程复合防 [07-24] ● "Polyurethane Products"
  • ●如何在屋顶操作聚氨酯喷涂 [09-10] ● How to operate polyurethane spray on the roof
  • ●怎么解决聚氨酯发泡机空泡现象 [05-08] ● How to solve the cavitation phenomenon of polyurethane foaming machine
  • ●聚氨酯喷涂作业时“应该”和“不应 [10-29] ● "should" and "should not" when spraying polyurethane
  • ●影响聚氨酯喷涂施工出方率的几个因 [10-29] ● Several factors affecting the yield of polyurethane spraying construction
  • ●聚氨酯喷涂施工的常见问题及原因 [10-29] ● Common problems and reasons of polyurethane spraying construction
  • ●聚氨酯防腐应用以及储存 [10-21] ● Application and storage of polyurethane anticorrosion
  • ●聚氨酯防腐漆在出现剥落现象 [10-21] ● The polyurethane anticorrosive paint is peeling off
  • ●聚氨酯防腐的主要涂覆方法 [10-21] ● Main coating methods for polyurethane anticorrosion
  • ●聚氨酯防腐的涂装工艺 [10-21] ● Polyurethane anticorrosive coating process
  • ●如何提高聚氨酯防腐的性能 [10-21] ● How to improve the anticorrosive performance of polyurethane
  • ●聚氨酯防腐适用领域以及特点 [10-21] ● Application areas and characteristics of polyurethane anticorrosion
  • ●聚氨酯高压喷涂设备的主要优点 [10-19] ● Main advantages of high pressure polyurethane spray equipment
  • ●聚氨酯发泡机选购前的对比方法 [09-19] ● Comparison method before purchasing polyurethane foaming machine
  • ●聚氨酯发泡机特点和工作流程介绍 [09-19] ● Introduction of polyurethane foam machine characteristics and work flow
  • ●聚氨酯高压发泡机和低压发泡机的区 [08-08] ● The area of polyurethane high pressure foaming machine and low pressure foaming machine
  • ●「耐高温材料」聚氨酯硬泡的发展方 [07-25] ● Development method of "high temperature resistant material" polyurethane rigid foam
  • ●「ws15」喷涂型聚氨酯应用指南 [07-25] ● "ws15" Spraying Polyurethane Application Guide
  • What are the methods of polyurethane sprayer maintenance?
    来源:http://motokone.com发布时间: 2018-09-06 15:13 Author: Polyurethane foam machine Source: http: //motokone.com Published: 2018-09-06 15:13
    1. Before using the sprayer every day, pay attention to check whether the grounding protection is intact. The grounding wire plays an important role in protecting the safety of equipment and personnel. No abnormal grounding is allowed.
    2. Before use, check whether the oil pipe is leaking oil and whether the air pipe is leaking. If any bad phenomenon is found, handle it in time to start the operation.
    3. The lubricant pump of the automatic oil supply system should maintain a certain amount of lubricant, otherwise 00 # or 000 # lubricant should be added in time.
    4. After use, clean up the raw materials on the sprayer in time and recover the remaining raw materials.
    5. It is very important to do a good job of cleaning and maintenance of the spraying machine itself. It must not be perfunctory.