Polyurethane small foaming machine spraying machine pouring machine
发布时间： 2018-05-12 14:52 Author: Polyurethane foam machine Source: http: //motokone.com
Published: 2018-05-12 14:52
How to use high-pressure foaming machine
1. This product uses a voltage of 380 volts and a three-phase four-wire system. The user connects the power supply according to the direction specified by the pump.
2. Add water to the water jacket of the two storage buckets and the air tank before use, whichever is subject to the tube
3. For the feeding of liquids A and B of the pouring machine, open the automatic feeding port to close the door and open the automatic feeding switch to complete the automatic feeding process quickly and easily. The company specializes in the consumption of anticorrosive and thermal insulation equipment. In order to provide customers with first-class equipment and professional service as the criterion, Leader will work with you to create a wonderful tomorrow. Choosing Lead, your solid partner companion heat pipe foaming machine, on-site foaming equipment, polyurethane high-pressure foaming machine is better said than done, I hope that colleagues in the industry have the need to give Lead the opportunity to show insulation, but also to me When choosing a high-pressure foaming machine, it is better to miss it when you pass by. It is good to understand more. After all, the equipment has a long operating cycle. Choosing a good foaming machine will bring great benefits to your company's consumption, so the comparison Let ’s take a look at the new and old customers.
4. Set the required time on the computer of the pouring machine, then open the sample port to cut off the door, open the automatic loading switch, weigh out the weight and weight difference between the set time, adjust A, B cut Station to balance the proportion of work needs
5, pouring time setting, according to the required amount and the flow of the machine to set the required working time, pouring time can be set between 0-99. 9 seconds, setting accuracy is 1%
6. After the pouring time is set, turn on the gas supply switch and move the wrench switch to start pouring. It will automatically stop when the set working time is reached, but the gas should be automatically supplied for 3-5 seconds to flush the remaining material and turn on the wrench switch. Rinse the tip with water and gas to complete the job
You might be interested in the following information?